Tuesday, May 27, 2014

Unlocking Huawei Ascend Y300 Via NCK Dongle

I have here this Huawei Ascend Y300 ready for unlock. Although Sigma Box supports this unlocking, I used my NCK Dongle to unlock it. Before unlocking you must first ROOT the unit. Before ROOTING, you must install all its drivers, or else it will not be detected by the ROOT Software.

How To Unlock Huawei Ascend Y300 Via NCK Dongle
1. ROOT using a rooting software as seen on the image below.
2. Open NCKdongle v14.2. Click Huawei Android Tab.
3. Select correct model.
4. Click Unlock Phone.
5. Done.





Samsung A687 Lock On AT&T Unlocked Via Z3X Samsung

Unlocking this Samsung A687 requires a GSM Box called Z3X Box Samsung activated. First thing to do is you must install Samsung USB drivers. Power on the phone, insert  USB cable and let it install the drivers. After that open Samsung 3g Tool 9.4. Take note when you are running on Windows 7 OS you must right click on the Samsung 3g Tool 9.4 and run as Administrator. Choose the correct phone model, then proper comport. Finally click on UNLOCK SP on the Z3X software, then on the phone press number 1 and 0 then insert USB cable without battery. The unit will be detected and SP Unlock will be calculated. See image below.

After that put a non-accepted SIMCARD on the unit, enter unlock code.

Smile.


How To Unlock Samsung Galaxy S3 T989 Using Octopus Box

Unlocking Samsung Galaxy S3 T989 using Octupos Box is as easy as eating ice cream :) Although this Android Smart Phone is also supproted by Z3X box. The procedures are as follows:

1. Go to Menu->Settings->Applications->Development. Turn on "USB Debugging" option.
2. When message is appear press "Yes". Go to dial window.
3 .Enter "*#7284#" number. Set "USB" radio button to "Modem" value.
4. Close window. Go to dial window.
5. Enter "*#9090#" number. Set "Diag config" to "USB" value.
6. Restart phone.
7. Insert micro usb cable and install divers needed. Note if drivers are not properly installed the unit can not be detected by Octopus Box. So be sure that all the drivers are properly installed.
8 .Open Octouos for Samsung.
9. On Samsung Qualcom tab, select model T989.
10. Select proper com port. Then click Read Info .
11. Then click Unlock and wait until finish.

Here is the software logs given by Octopus Box:

Platform: Samsung Android
Selected port: COM79
Selected model: SGH-T989
Mode: Normal
Phone model: SGH-T989
Firmware compiled date: Sep 09 2011
Firmware compiled time: 17:00:00
Firmware released date: Jan 14 2013
Firmware released time: 11:32:24
Phone IMEI: 359605-04-225882-5
SW version: M9200B-SCAQCSZD-3.0.552092
-----------------------------------------------------------------------------------
Platform: Samsung Android
Selected port: COM79
Selected model: SGH-T989
Mode: Normal
Phone model: SGH-T989
Firmware compiled date: Sep 09 2011
Firmware compiled time: 17:00:00
Firmware released date: Jan 14 2013
Firmware released time: 11:32:24
Phone IMEI: 359605-04-225882-5
SW version: M9200B-SCAQCSZD-3.0.552092
Unlocking phone...
Phone is successfully unlocked
To finish the operation, please restart the phone via phone's menu 
(don't disconnect the battery!)